 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Single Pole OptoMOS(R) Relay OMA160 Parameter Blocking Voltage Load Current Max On-resistance Rating 250 50 100 Units VP mA Description The OMA160 is a 250V, 50mA, 100, 1-Form-A relay featuring high speed switching capability. Features * 100% Solid State * Small 6-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * EN/IEC 60950-1:2001 Compliant Ordering Information Part Number OMA160 OMA160S OMA160STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment - Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Pin Configuration AC/DC Configuration DC Only Configuration + Control - Control Do Not Use 1 2 3 6 5 4 Load Do Not Use Load + Control - Control Do Not Use 1 2 3 6 5 4 + Load - Load Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10% + TON 10%+ TOFF 2002/95/EC RoHS e3 www.clare.com 1 DS-OMA160-R09 OMA160 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Conditions Symbol Min Typ Max Units t=10ms IL=50mA IL=80mA VL=250V IF=10mA, VL=10V IF=10mA, VL=10V 50V; f=1MHz IL=50mA IF=10mA VR=5V - IL ILPK RON ILEAK TON TOFF COUT IF IF VF IR CI/O 0.4 0.9 - 50 15 5 1.2 3 50 80 100 100 30 25 0.125 10 1.4 10 - mA mA nA ms pF mA mA V A pF 2 www.clare.com R09 OMA160 PERFORMANCE DATA* OMA160 Typical LED Forward Voltage Drop (TA = 25C; IF = 10mADC) N=50 35 30 Device Count (N) Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 35 30 25 20 15 10 5 0 42.5 43.5 44.5 45.5 46.5 47.5 Device Count (N) OMA160 Typical On-resistance Distribution (TA = 25C; IL = 50mADC; IF = 10mADC) N=50 35 30 25 20 15 10 5 0 OMA160 Typical Blocking Voltage Distribution (TA = 25C) N=50 367.5 374.5 381.5 388.5 395.5 402.5 LED Forward Voltage Drop (V) On-resistance () Blocking Voltage (VP) 25 20 OMA160 Typical IF for Switch Operation (TA = 25C; IL = 50mADC) N=50 25 20 15 10 5 0 OMA160 Typical IF for Switch Dropout (TA = 25C; IL = 50mADC) N=50 30 25 OMA160 Typical Turn-On Time (TA = 25C; IL = 50mADC; IF = 10mADC) N=50 Device Count (N) Device Count (N) Device Count (N) 1.625 2.075 2.525 2.975 3.425 3.875 15 10 5 0 20 15 10 5 0 1.625 2.075 2.525 2.975 3.425 3.875 0.05 0.07 0.09 0.11 0.13 0.15 LED Current (mA) LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 OMA160 Typical Turn-Off Time (TA = 25C; IL = 50mADC; IF = 10mADC) N=50 0.012 0.017 0.022 0.027 0.032 0.037 100 90 80 70 60 50 40 30 20 10 0 OMA160 Typical Load Current vs. Temperature 0.014 0.012 Leakage (A) 0.010 0.008 0.006 0.004 0.002 0 OMA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Load Current (mA) Device Count (N) IF=30mA IF=20mA IF=10mA -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (C) Temperature (C) 400 Blocking Voltage (VP) 395 OMA160 Typical Blocking Voltage vs. Temperature 1.50 1.25 1.00 0.75 0.50 0.25 -40 -20 0 20 40 60 80 100 0 -40 OMA160 Typical Turn-On vs. Temperature (IL = 50mADC) 385 380 375 370 365 IF = 10mA IF = 20mA -20 0 20 40 60 80 100 Temperature (C) Turn-Off (ms) Turn-On (ms) 390 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 OMA160 Typical Turn-Off vs. Temperature (IL = 50mADC; IF = 10mA) -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.clare.com 3 OMA160 PERFORMANCE DATA* OMA160 Typical LED Forward Voltage Drop vs. Temperature OMA160 Typical Turn-On vs. LED Forward Current (IL = 50mADC) OMA160 Typical Turn-Off vs. LED Forward Current (IL = 50mADC) LED Forward Voltage Drop (V) 1.8 1.6 0.18 0.16 0.14 Turn-On (ms) 0.040 0.035 1.4 1.2 1.0 0.8 Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 0.12 0.10 0.08 0.06 0.04 0.02 0 0.030 0.025 0.020 0.015 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA -40 -20 0 20 40 60 80 100 120 0 Temperature (C) 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Forward Current (mA) 70 60 On-resistance () OMA160 Typical On-resistance vs. Temperature (IL = 50mADC; IF = mADC) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 OMA160 Typical IF for Switch Operation vs. Temperature (IL = 50mADC) LED Current (mA) 40 30 20 10 0 -40 -20 0 20 40 60 80 100 LED Current (mA) 50 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 OMA160 Typical IF for Switch Dropout vs. Temperature -40 -20 0 20 40 60 80 100 Temperature (C) -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 50 40 30 20 10 0 -10 -20 -30 -40 -50 OMA160 Typical Load Current vs. Load Voltage (TA = 25C; IF = 10mADC) 0.45 0.40 Load Current (A) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 OMA160 Energy Rating Curve Load Current (mA) -3 -2 -1 0 1 2 3 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R09 OMA160 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Recommended soldering processes are limited to 260C component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 2002/95/EC RoHS e3 MECHANICAL DIMENSIONS 6-Pin DIP Through Hole (Standard) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 8.382 0.381 (0.330 0.015) PC Board Pattern (Top View) 2.540 0.127 6-0.800 DIA. (0.100 0.005) (6-0.031 DIA.) 7.620 0.127 (0.300 0.005) 7.239 TYP (0.285 TYP) 6.350 0.127 (0.250 0.005) 6.350 0.127 (0.250 0.005) 0.254 TYP (0.010 TYP) 9.144 0.508 (0.360 0.020) 2.540 0.127 (0.100 0.005) 5.080 0.127 (0.200 0.005) 6-Pin Surface Mount ("S" Suffix) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 4.445 0.127 (0.175 0.005) 0.635 0.127 (0.025 0.005) 8.382 0.381 (0.330 0.015) 2.540 0.127 (0.100 0.005) 9.525 0.254 (0.375 0.010) 6.350 0.127 (0.250 0.005) PC Board Pattern (Top View) 2.540 0.127 (0.100 0.005) 8.305 0.127 (0.327 0.005) 1.905 0.127 (0.075 0.005) 0.457 0.076 (0.018 0.003) 1.499 0.127 (0.059 0.005) Tape and Reel Packaging for Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 6 W = 16.30 MAX (0.642 MAX) B0 = 10.10 (0.398) Top Cover Tape Embossment Carrier K0 = 4.90 (0.193) P = 12.00 (0.472) A0 = 10.10 (0.398) Embossment K1 = 3.80 (0.150) Dimensions: mm (inches) User Direction of Feed For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-OMA160-R09 (c)Copyright 2006, Clare, Inc. All rights reserved. Printed in USA. 10/23/06 5 |
Price & Availability of OMA1601
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |